Saltwater & Reef: Reef Magnesium 1,350 ppm Role Guide for Aquarium Keepers
Understand why 1,350 ppm magnesium prevents abiotic calcium carbonate precipitation, how chloride-to-sulfate ratios work, and how to calculate safe US, UK, and EU doses.
Updated 2026-11-20 · 1694 words
In marine aquarium chemistry, calcium and alkalinity grab almost all the headlines, yet neither parameter can remain stable for long without magnesium (Mg²⁺). In natural coral reef seawater at 35 ppt salinity, magnesium sits at roughly 1,280 to 1,300 ppm, making it the third most abundant dissolved ion behind chloride and sodium—and more than three times as concentrated as calcium (~420 ppm). Most experienced SPS and mixed-reef keepers target a slightly wider operational window of 1,300 to 1,400 ppm (commonly 1,350 ppm).
Why does a reef tank need 1,350 ppm of an ion that makes up only a small fraction of coral skeletons? Because magnesium is the chemical gatekeeper that prevents calcium and carbonate from locking together into useless chalk in your water column, sump, and pumps. When magnesium drops below ~1,150 ppm, aquarists often find themselves trapped in an impossible loop: dosing more and more calcium and alkalinity only to watch both numbers sink lower while white scale coats every impeller and heater in the system.
The Ionic Shield: How Magnesium Prevents Abiotic Precipitation
As noted in seawater thermodynamics, reef water at pH 8.1–8.3, 8.0 dKH, and 420 ppm calcium is already 300% to 400% supersaturated with respect to calcium carbonate (CaCO₃). Thermodynamically, Ca²⁺ and CO₃²⁻ want to collide and crystallize into solid aragonite and calcite immediately. What stops the ocean from turning milky white is kinetic inhibition, driven primarily by Mg²⁺ ions.
A dissolved magnesium ion has a small ionic radius and a +2 charge, giving it an unusually high charge density and a tightly bound hydration shell of water molecules. When a microscopic calcium carbonate seed crystal begins to nucleate in reef water, Mg²⁺ ions adsorb onto the active growth steps of the crystal lattice. Because magnesium does not fit neatly into the pure calcite crystal geometry and holds onto its hydration shell stubbornly, it physically blocks further Ca²⁺ and CO₃²⁻ ions from attaching. Essentially, magnesium "poisons" the growing crystal surface, stalling abiotic precipitation indefinitely.
Biological Roles Beyond Precipitation Control
- Skeletal Incorporation: Calcifying organisms actively incorporate magnesium into their skeletons. Coralline algae (which builds high-magnesium calcite) can contain 2% to 5% magnesium by weight—far more than stony corals (typically 0.1% to 0.5% Mg in aragonite). Rapidly spreading pink and purple coralline algae is one of the fastest biological drains on reef magnesium.
- Chlorophyll & Zooxanthellae Photosynthesis: Magnesium sits at the center of every chlorophyll molecule inside symbiotic zooxanthellae (Symbiodinium) and macroalgae. Severe magnesium deficiency (<1,100 ppm) can manifest as pale, washed-out coral tissue and slowed photosynthetic energy transfer.
- Cellular Enzyme & Ion Transport: Marine fish and invertebrates rely on Mg²⁺ as a cofactor for ATP-dependent enzymes that regulate osmoregulation and neuromuscular function.
Magnesium Target Ranges and Ionic Relationships
Maintaining magnesium at 1,350 ppm provides a comfortable buffer above the ~1,200 ppm threshold where abiotic precipitation risk climbs sharply, while staying safely below levels (>1,550–1,600 ppm) that can irritate snails, sea urchins, and sensitive invertebrates.
| Magnesium Level (ppm) | Chemical & Biological Status | Observed Reef Symptoms | Recommended Action |
|---|---|---|---|
| < 1,150 ppm | Severe depletion; kinetic CaCO₃ inhibition failing | Chronic low Ca/Alk despite heavy dosing; white scale on heaters/pumps; sluggish coralline growth | Corrective dosing over 4–7 days (max +50–100 ppm/day) |
| 1,150 – 1,250 ppm | Marginal; elevated precipitation risk above pH 8.3 | Difficulty holding Alk > 8.5 dKH or Ca > 420 ppm simultaneously | Raise gradually to 1,350 ppm; audit salt mix batch |
| 1,280 – 1,400 ppm (Target: 1,350 ppm) | Optimal natural seawater & SPS buffer zone | Stable Alk/Ca balance; clean pump impellers; vigorous coralline and stony coral calcification | Maintain via water changes and balanced Part 3 / Balling dosing |
| 1,450 – 1,550 ppm | Elevated (historically used with impure tech-M for Bryopsis) | Generally tolerated by corals; some snails become lethargic | Allow natural depletion and water changes to bring back to 1,350 ppm |
| > 1,600 ppm | Excessive | Invertebrate stress (trochus/turbo snails dropping off glass), slowed growth | Perform 15%–20% water changes with 1,300 ppm salt mix |
Why Magnesium Corrections Require Massive Supplement Volumes
New reef keepers are often shocked when a dosing calculator tells them to add 1,500 mL of magnesium liquid to raise their tank by just 100 ppm, whereas raising calcium by 20 ppm takes only a fraction of that volume. Two mathematical facts explain why:
- Pure Scale of the Target: Raising magnesium from 1,200 to 1,350 ppm is a 150 mg/L increase.
- Low Elemental Mg Fraction in Salts: Magnesium chloride hexahydrate (MgCl₂·6H₂O) is only 11.95% elemental Mg by weight (the other 88% is chloride and six bound water molecules!). Magnesium sulfate heptahydrate (MgSO₄·7H₂O, Epsom salt) is even lighter in magnesium—just 9.86% elemental Mg by weight.
That means to add 1 gram of pure Mg²⁺ ion, you must dissolve 8.37 grams of MgCl₂·6H₂O or 10.14 grams of MgSO₄·7H₂O.
Balancing Chloride and Sulfate: The 10:1 DIY Ratio
If you dose pure magnesium chloride forever without water changes, chloride (Cl⁻) accumulates relative to sulfate (SO₄²⁻). Conversely, dosing pure Epsom salt (MgSO₄·7H₂O) alone spikes sulfate dramatically. To match natural seawater's chloride-to-sulfate ratio when correcting magnesium in a tank that also uses two-part dosing (which adds extra chloride via CaCl₂), Randy Holmes-Farley's classic Recipe #3A blends 5 parts MgCl₂·6H₂O to 3 parts MgSO₄·7H₂O by volume (or roughly 10:1 if you are only making standalone corrections without two-part). Specifically, for standalone magnesium corrections, blending 10 parts MgCl₂·6H₂O with 1 part MgSO₄·7H₂O by weight matches natural seawater's ~7.1:1 Cl⁻:SO₄²⁻ mass ratio almost exactly.
Step-by-Step Worked Examples (US, UK, and EU Reef Systems)
Worked Example 1 (US): Raising a 120-Gallon Reef from 1,180 ppm to 1,350 ppm
A keeper in Tampa, Florida, has a 120-US-gallon display + 40-gallon sump with 135 US gallons (511 liters) of net water volume. After months of heavy coralline algae growth, magnesium tests at 1,180 ppm. The target is 1,350 ppm (+170 ppm).
- Calculate total elemental Mg²⁺ needed: 511 L × 170 mg/L = 86,870 mg = 86.87 g of pure Mg²⁺.
- Convert to dry 10:1 blend (MgCl₂·6H₂O + MgSO₄·7H₂O): Because MgCl₂·6H₂O is 11.95% Mg and MgSO₄·7H₂O is 9.86% Mg, a 10:1 weight blend averages 11.76% elemental Mg. Therefore: 86.87 g / 0.1176 = 738.7 g total dry salt (671.5 g MgCl₂·6H₂O + 67.2 g MgSO₄·7H₂O).
- Apply the 50–100 ppm/day safety cap: Never raise magnesium by 170 ppm in one shot, as impurities (especially trace ammonia or heavy metals in lower-grade salts) and osmotic shifts can stress corals. Split the 739 g dose across 3 consecutive days (~246 g/day, raising Mg by ~57 ppm/day), dissolved in 1 US gallon of RO/DI water and dripped slowly into the sump return chamber.
- Monitor salinity: Adding 739 g of hydrated salts adds ~370 g of anhydrous ions to 511 L, nudging salinity up by ~0.7 ppt (+0.0005 SG). Check your refractometer after Day 3 and compensate with a small RO/DI top-off adjustment if needed.
Worked Example 2 (UK): Maintenance Dosing for a 300-Liter Coralline-Heavy Tank
A hobbyist in Edinburgh runs a 300-liter net-volume LPS/soft coral reef with dense coralline algae plating the back glass. Between biweekly 10% water changes, magnesium drops by 45 ppm every 14 days (~3.2 ppm/day). They use a commercial liquid magnesium supplement rated at 100,000 ppm (100 mg Mg per mL).
- Calculate daily Mg mass consumed: 300 L × 3.2 mg/L/day = 960 mg/day.
- Convert to liquid supplement volume: 960 mg/day ÷ 100 mg/mL = 9.6 mL/day (round to 10 mL/day on a peristaltic pump, or 67 mL twice weekly).
- Verify salt mix baseline: Always test newly mixed water change batches—if your salt mixes to 1,260 ppm at 35 ppt, each 30 L (10%) water change pulls a 1,350 ppm tank down by 9 ppm unless you pre-boost the fresh batch by +90 ppm (27 mL of supplement into the 30 L drum).
Worked Example 3 (EU): Auditing Balling Part 3 Consumption in a 500-Liter SPS Reef
In Frankfurt, an aquarist runs a 500-liter SPS system consuming 1.5 dKH/day of alkalinity and 10.7 ppm/day of calcium. Roughly how much magnesium should that calcification consume, and how do they avoid over-dosing?
- Estimate biological Mg uptake: Stony corals typically incorporate Mg at 1% to 3% of their calcium uptake by mass (plus coralline algae). Taking 2.5% of 10.7 ppm Ca/day gives ~0.27 ppm Mg/day—only ~8 ppm per month!
- Diagnostic takeaway: If a 500 L SPS tank appears to "lose" 50 ppm of magnesium in a single week without massive coralline growth, the culprit is almost always salinity drift (e.g., skimmer wet-skimming exporting saltwater that is replaced by RO/DI top-off, dropping salinity from 35 ppt to 33.7 ppt!) or test kit titration error, not coral consumption.
- Routine: Test magnesium once every 2 to 4 weeks—never daily—and adjust Balling Part 3 only when readings fall below 1,300 ppm.
Testing Pitfalls and Maintenance Checklist
Magnesium titration kits are notoriously sensitive to user technique because they rely on a two-step colorimetric endpoint (often shifting from pink/purple to pure blue) and measure a huge ion concentration where a single drop of titrant represents 15 to 30 ppm.
- Always check salinity first: Dropping salinity from 35 ppt to 32 ppt automatically lowers magnesium from 1,350 ppm to 1,234 ppm—fixing salinity fixes the "magnesium deficiency" immediately.
- Swirl for 15–20 seconds after reagent additions: Most magnesium tests require precipitating calcium out of the sample or buffering pH before titrating; rushing the swirl leaves false high or low endpoints.
- Check the true blue endpoint in daylight: Under blue-heavy reef LEDs (20,000K), purple-to-blue color shifts are nearly impossible to judge accurately. Read titration vials under neutral 5,000K–6,500K kitchen or desk lighting against a white sheet of paper.
- Log pump scale & heater crust: If you ever see rapid white buildup on a heater or skimmer pump neck, test magnesium immediately alongside alkalinity and pH.
Why Low-Purity Magnesium Salts Cause Ammonia and Heavy Metal Spikes
Because a single corrective magnesium dose can require nearly a kilogram of dry salt, chemical purity matters far more than it does for trace elements. Technical-grade or de-icing magnesium chloride pellets—even those labeled "99% pure"—frequently contain up to 0.1% to 0.5% ammonium salts (NH₄⁺), bromide, or trace heavy metals such as copper and iron. Adding 750 grams of de-icing MgCl₂·6H₂O with just 0.1% ammonia impurity to a 500-liter reef injects 750 mg of ammonia (1.5 ppm!) in one pour—enough to burn fish gills and stress sensitive Acropora colonies.
Always source pharmaceutical-grade (USP / Ph. Eur.) or verified aquarium-grade magnesium chloride hexahydrate and USP Epsom salt (MgSO₄·7H₂O). If you ever mix a new batch of DIY magnesium supplement and smell a faint ammonia odor or test positive on a freshwater salicylate ammonia kit after diluting 10:1, discard it immediately rather than risking your display tank.
Testing Frequency, Titration Technique, and Target Stability
Because marine organisms consume magnesium far more slowly than calcium or carbonate alkalinity—typically 1 to 3 ppm per day in heavily stocked SPS systems—hobbyists often neglect routine magnesium testing until abiotic precipitation or stubborn low alkalinity appears. Test magnesium every two weeks using a fresh titration kit or photometric checker, rinsing syringes thoroughly with RO/DI water after each assay to prevent salt crystal buildup from skewing titrant volume. When correcting a deficit greater than 100 ppm, split total supplementation across three to four daily doses (capping increases at 50–80 ppm per 24 hours) into a high-flow sump zone so trace impurities and localized osmotic shifts never irritate polyps or calcareous coralline algae.